使用udev后fdisk无法显示原来磁盘的解决办法 _MySQL, Oracle及数据库讨论区_Weblogic技术|Tuxedo技术|中间件技术|Oracle论坛|JAVA论坛|Linux/Unix技术|hadoop论坛

总帖数

每页帖数

1/1页

返回列表

发起投票

查看: 2261 | 回复: 0

主题： 使用udev后fdisk无法显示原来磁盘的解决办法

dwx8023

注册用户

等级：上尉
经验：612
发帖：114
精华：0
注册：2011-11-8
状态：离线
发送短消息息给dwx8023

加好友发送短消息息给dwx8023

发消息

发表于：

2015-5-8 10:51:35 | [全部帖] [楼主帖]

楼主

环境:

OS:Red Hat Linux As 6

准备安装在Linux as 6上安装rac,因为oracle没有提供针对as6的asmlib, 这里只能采用udev的方式实现,在/etc/udev/rules.d目录下创建了规则文件
99-oracle-asmdevices.rules,内容如下:

[root@node1 rules.d]# more 99-oracle-asmdevices.rules
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARD
DISK_VB89c8ba2c-f20b8df1", NAME="asm-crs1", OWNER="grid", GROUP="asmdba", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARD
DISK_VBd1eef806-00def761", NAME="asm-crs2", OWNER="grid", GROUP="asmdba", MODE="0660"
KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARD
DISK_VB25efb5bc-25eed08b", NAME="asm-crs3", OWNER="grid", GROUP="asmdba", MODE="0660"

机器重新启动后,在节点1和节点2的/dev目录下看到了asm磁盘,说明规则文件已经生效了.

[root@node1 dev]# ls -al asm*
brw-rw----. 1 grid asmdba 8, 16 Feb 20 11:31 asm-crs1
brw-rw----. 1 grid asmdba 8, 32 Feb 20 11:31 asm-crs2
brw-rw----. 1 grid asmdba 8, 48 Feb 20 11:31 asm-crs3
[root@node2 /]# cd dev
[root@node2 dev]# ls -al asm*
brw-rw----. 1 grid asmdba 8, 16 Feb 20 11:39 asm-crs1
brw-rw----. 1 grid asmdba 8, 32 Feb 20 11:39 asm-crs2
brw-rw----. 1 grid asmdba 8, 48 Feb 20 11:39 asm-crs3

但是在两个节点上使用fdisk查看不到原来的硬盘了,奇怪了.

[root@node1 rules.d]# fdisk -l
Disk /dev/sda: 32.4 GB, 32428654592 bytes
255 heads, 63 sectors/track, 3942 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000eab1
Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        3570    28672000   83  Linux
/dev/sda2            3570        3943     2995200   82  Linux swap / Solaris

估计是udev没有启动,于是分别在两个节点上使用如下命令启动udev.

start_udev

启动完成之后,再次查看,果然看到了原来的磁盘.

[root@node1 ~]# fdisk -l
Disk /dev/sda: 32.4 GB, 32428654592 bytes
255 heads, 63 sectors/track, 3942 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000eab1
Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1        3570    28672000   83  Linux
/dev/sda2            3570        3943     2995200   82  Linux swap / Solaris
Disk /dev/sdb: 1181 MB, 1181947904 bytes
255 heads, 63 sectors/track, 143 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdc: 1181 MB, 1181947904 bytes
255 heads, 63 sectors/track, 143 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/sdd: 1181 MB, 1181947904 bytes
255 heads, 63 sectors/track, 143 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000

为了使udev自动生效,修改如下文件

vim /etc/rc.d/rc.local

将udev启动加入到该文件中即可.

/sbin/start_udev
-- The End --

--转自